DO IT YOURSELF PRICES
INCLUDES COMPLETE WIRING DIAGRAMS AND SAMPLE LAYOUT CONFIGURATIONS.
Some BitSwitches include Signal
Connections
Brake Generator
$25.00
(manual
version)
This Brake Signal Generator is manually
operated and is suitable for systems where the mobile decoders support
DC
analog conversion for braking or "Asymmetric
Signal" (Lenz Gold decoders)
Set Speed Zero Packet Generator $ 85.00
This Set Speed Zero Generator
can be
operated via CAB and is suitable for all systems. This device
includes a
"Set Speed Zero"
packet encoder. This code generator broadcasts a set speed zero command
and is addressable. Suitable for those layouts running
Soundtrax, older NCE or other decoders that do not recognize DC conversion. A
dedicated power booster is required.
Accessory Power Drop $19.95
This module allows for the connection of
any 5, 9 or 12 VDC
accessory direct to DCC track power. The module supplies a positive
voltage regulated current up to 1 Amp to power features such as lights, motor
driven devices, billboards etc.
X Gate/Signal BitSwitch
Price $19.95
This BitSwitch can be used for
triggering sound effects, closing a crossing gate, powering a X signal or any
other purpose where it is desirable to apply 6 to 12 VDC to an accessory on the
rail side.
Input power source can be 12 to 35 volts AC, DC or DCC.
Output power can be 6 VDC, 9 VDC, 12 VDC or Output=Input depending on the unit ordered.
Input voltage must be > or = to
the output voltage
Note: This BitSwitch will work for any
layout regardless of the power used to operate the engines
(AC, DC, DCC or BATTERY)
Timed Stop BitSwitch $89.95
Used to stop trains when they enter an isolated section (Block, Station,
Spur etc.). Timed stop is adjustable from 0 to 120 seconds. Is compatible
with all BitSwitch controls.
Alternate Spur $69.95
A
train entering either of two spurs will be stopped and held until
another train enters the adjoining spur and then released to the main line.
Alternate Spur For Analog
DC Layouts $69.95
A
train entering either of two spurs will be stopped and held until
another train enters the adjoining spur and then released to the main line.
Yard Siding BitSwitch $49.95
Used to stop trains as they enter a siding dependent on the turnout
position of that sidings exit. Is compatible
with all BitSwitch controls.
Includes
Signal Control.
Block BitSwitch $44.95
with signal output $49.95
Controls one block on a line. Is compatible
with all BitSwitch controls.
Block BitSwitch For Analog DC Layouts $49.95
Controls one block on a line.
Station BitSwitch $69.95 with Signal
output $79.95
Controls two blocks on lines that merge at a station where the
operator wishes the trains to stop. Is compatible
with all BitSwitch controls.
Passing Siding BitSwitch
$69.95 with Signal output $79.95
Controls two blocks on lines that separate at a siding where the
operator wishes trains diverted to the siding to stop and remain in the
siding until another train passes on the MAIN LINE. Is compatible
with all BitSwitch controls.
Merge BitSwitch $79.95
Controls Two blocks on lines that merge
to a single line where the operator wishes the trains to stop only as traffic
requires. Is compatible with all BitSwitch controls.
Spur BitSwitch $69.95 without
signal $79.95 with Signal
Controls one block immediately
proceeding track points and checks the position of the points (closed or
thrown) and also checks both lines following the points for occupancy.
Is compatible with all BitSwitch controls.
DT-ST-DT
BitSwitch $89.95
Controls a section of main line that
operates in a Bi-Directional mode. This BitSwitch accommodates Double
Track to Single Track main to Double Track condition. Is compatible with all BitSwitch controls.
2 Way Crossing Control Stand Alone
Version $69.95
2 Way Crossing Control for Integration with other BitSwitches
$89.95
Controls a crossing where traffic flow
in the automatic mode is always moving in the same direction on either
crossing line. Allows the trains to cross on a first come first serve
basis. Is compatible with all BitSwitch controls.
4 Way Crossing Guard 2.5 Amp only $94.95
STAND ALONE DEVICE
Not suitable for large scale layouts.
stand alone device or with "Block
BitSwitches" on each approach for additional control but is not fully compatible
with all BitSwitches controls.
