DCC Accessory Decoders for Automatic Turnout Control
For DC Turnout Control 
Click Here

USE ACCESSORY DECODERS FOR AUTOMATIC AND/OR MANUAL CONTROL OF YOUR TURNOUTS

TRACK TRIGGERS (REED SWITCHES) CAN BE USED TO CONTROL TURNOUTS
GO BACK

Control turnouts at both ends of a Bi-Directional Section

Use any of the following NCE Accessory Decoders
Track Contacts not included for Contacts
Click Here

MSRP $24.95 SWITCH-IT YOUR PRICE $19.46
ORDER HERE

Control two SwitchMasterTM, TortoiseTM or similar stall motor switch machines. Switch-It remembers the position of your switches during power outages. Each output of the decoder can have a completely different accessory address. The Switch-It provides connections for "local control" pushbuttons. Control switches from your cabs and your control panels. TortoiseTM is a registered trademark of Circuitron, Inc.

MSRP $19.95 SNAP-IT YOUR PRICE $15.56
ORDER HERE

Control one twin coil switch machine. Has capacitive discharge for low current draw of track power. Provides connections for two "local control" pushbuttons. You can control switches from your cabs and your control panels

MSRP $19.95 SWITCH-KAT YOUR PRICE $15.56
ORDER HERE

Your Kato UnitrackTM and LGB remote control turnouts can now be DCC controlled. The Switch-Kat provides connections for optional switch position indicator lights and "local control" pushbuttons. Simple installation, two wires to the track, two wires to the switch.

For Outdoor installation of G-Scale Layouts
the Switch-Kat will fit the Hammond 1551K
project box, sealed and buried in  ballast.
$3.00/ea w/o Terminals
$5.00/ea with Terminals

Click to enlarge

GO BACK